Bremsevæske DOT 4 og 5

DOT 5

250cc bottle. Purple colored. Non agressive for paint. Not compatible with anti-lock brakes due to quicker foaming. Will not absorb water. Do not mix with other brake fluids. Tech tip: If you want to use DOT 5 may be easier to decide if it's right for you with some added knowledge about this type of brake fluid. DOT 5 silicone is non-aggressive for painted surfaces, plastics and has anti-corrosive characteristics, is non-hygroscopic and will therefore not absorb water. Great characteristics for vehicles that are not used much. However, when water accumulates in the brake system over time, and it is not absorbed by the brake fluid, in theory it could create pockets of water which could boil in extreme circumstances. This could result in vapor lock and total brake failure. Since DOT 5 silicone does not absorb water the accumulated water may not fully be removed from the brake system when the brake fluid is changed. DOT 5 silicone may never be mixed with DOT 3 or 4 brake fluids. It is also not compatible with ABS (Anti-lock Brake System) or ASR (Anti Slip Regulation) since it will foam easier. Note that The Factory has used DOT 5 up to around 2006, about the time when ABS was introduced...

DOT 4

250cc bottle. Compatible with ABS/ASR brake systems. Yellow colored. Wet/dry boiling >155°C/>230°C. Hygroscopic , miscible (mixable) with water. Glycol based. Aggressive, will attack paints etc. Will not affect sealing cups, brake fluid lines or seal rings. DOT 5.1 can be mixed with other synthetic brake fluids, meeting FMVSS 116 DOT 3, DOT 4 and DOT 5.1 specifications, not compatible with LHM or DOT 5 silicone. Performance level: FMVSS 116 DOT 4, ISO 4925 class 4, SAE J1704.